TaylorC791

Specifications

• Electrical

                One dedicated electrical connection is required. See the electrical chart for the proper                        electrical requirements. Unit supplied with cord and plug. Consult the international Taylor                    distributor for cord and receptacle specifications for  50 Hz equipment.

• Beater Motor

                 Two, 1.5 hp.

• Refrigeration System

                 One, 10,100 BTU/hr. R449A.
                 Separate Hopper Refrigeration (SHR), one, 400 BTU/hr. R134a. (BTUs may vary                                             depending on compressor used.)

•  Air-Cooled

                 Minimum clearance of 3” (76 mm) around all sides. Install the deflector provided to                             prevent recirculation of warm air. Minimum air clearances must be met to ensure                                 adequate airflow for optimum performance.

•  Water-Cooled

                 Water inlet underside of base 1/2” FPT.

•  Accessories

               • Cone Dispenser
               • Draw Valve Lock Kit
               • Syrup Rail Kit (side mount)

•  Options

               • Hopper Agitators
               • Rear Mix Lights