Taylor C713

Offers all the popular soft serve variations, from low or non-fat ice creams to custards, yogurt, and sorbet. Serve two separate soft serve flavors or an equal combination of both in a twist.

Specifications
Electrical
Two dedicated electrical connections are required. See the electrical chart
for the proper electrical requirements. Manufactured to be permanently
connected. Consult your local Taylor distributor for cord and receptacle
specifications as local codes allow.

Beater Motor
Two, 1.5 hp.

Refrigeration System
Two, 10,100 BTU/hr. R449A. Separate Hopper Refrigeration (SHR),
one, 400 BTU/hr. R134a. (BTUs may vary depending on compressor used.)

Air-Cooled
Minimum 3” (76 mm) around all sides. Install the deflector provided to
prevent recirculation of warm air. Minimum air clearances must be met to
ensure adequate airflow for optimum performance.

Water-Cooled
Water inlet and drain connections underside of base 1/2” FPT.

Accessories
• Cone Dispenser
• Drain Adaptor (for ease of rinsing and cleaning)
• Draw Valve Lock Kit
• Faucet
• Hopper Locks
• Syrup Rail Kit (side mount)

Options
• Hopper Agitators
• Panel Spinner
• Syrup Rail (integrated)
• Syrup Rail Kit (side mount)