Taylor C708

 Specifications
 Electrical 
One dedicated electrical connection is required. See the electrical chart 
for the proper electrical requirements. Manufactured to be permanently 
connected. Consult your local Taylor distributor for cord and receptacle 
specifications as local codes allow. 

Beater Motor 
One, 1.5 hp. 

Refrigeration System
 One, 10,100 BTU/hr. R449A.

Air-Cooled
 Minimum 6 in. (152 mm) on both sides and place the back of the machine 
against a wall to prevent recirculation of warm air. Minimum air clearances 
must be met to ensure adequate airflow for optimum performance. 
Optional air discharge chute directs heated air exhaust upwards. No 
clearance required on right side if air discharge chute is used. 

Water-Cooled
 Water inlet and drain connections out rear panel 3/8 in. FPT.

Options
 • Cart with casters-height to top of hopper cover: 59-5/8 in. (1,515 mm)
 • Cone Dispenser 
• Decals - Vanilla or Flavor Burst Cone 
• Hopper Locks 
• Legs  (increase height of unit by 4-1/4 in. [108 mm]) 
• Syrup Rail (front mount requires special cart with rear door)
 • Syrup Rail Kit (side mount) 
• Top Air Discharge Chute (air-cooled only) 

C201 Cart Weights:
 Net: 150 lb. (68.0 kg) Crated: 171 lb. (77.6 kg) 14.5 cu. ft. (0.41 cu. m