Soft Serve, Frozen Yogurt, Batch Freezer, Pasteurizer
Soft Serve Freezer
Twist, Pump, Heat Treatment
Heat Treatment freezers were designed to address some of McDonalds system-wide concerns of labor, product waste, maintenance and repair costs. The Heat Treatment system provides a daily heating and cooling cycle to safely maintain dairy products up to two weeks before a complete disassembly and cleaning is required.
Two, 3.4 quart (3.2 liter).
Two, 20 quart (18.9 liter). Simplified air/mix pumps deliver the precise amount of air and mix to the freezing cylinders, and reduces operator parts.
Digital readout displays number of days until next brush cleaning is required to assure product safety. Mix Low light alerts operator to add mix. Audible alarm may be enabled to sound when mix is low. When the Mix Out light flashes, the unit shuts down automatically to prevent damage.
Touch Screen Controls
Microprocessor touch controls are embedded in durable tempered glass panel. Multiple languages are selectable. Viscosity is continually measured to dispense consistent quality soft serve desserts. Soft lock out features improve reliability. Draw counter allows operator to view number of servings dispensed. Temperatures in the hoppers or freezing cylinders may be displayed at any point of operation, in either Fahrenheit or Celsius. History of temperatures and times during the last 366 heat cycles may be viewed from the fluorescent display.
During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.
Four compartment syrup rail for sundae toppings; two heated with syrup pumps and two room temperature with lids and ladles.
Cup and Cone Dispenser
Dispenser for sundae cups and three sleeves of cones may be mounted on either side of the freezer. (not shown in photo).
One dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Manufactured to be permanently connected. Consult your local Taylor distributor for cord & receptacle specifications as local codes allow.
Two, 1.5 HP.
Two, 9,500 BTU/hr. R404A.
(BTUs may vary depending on compressor used.)
Minimum 3” (76 mm) around all sides. Install the deflector provided to prevent recirculation of warm air. Minimum air clearances must be met to assure adequate air flow for optimum performance.