Taylor C161 - Double Flavour, Portable

Soft Serve Freezer
Compact Twin Twist, Taylormate®

Offer all the popular soft serve variations from low or non-fat ice creams to custard, yogurt and sorbet. Serve two separate soft serve flavors, or an equal combination of both in a twist.

Freezing Cylinder
Two, 1.5 quart (1.4 liter).

Mix Hopper
Two, 8 quart (7.6 liter). Separate hopper refrigeration (SHR) maintains mix below 41ºF (5ºC) in Auto and Standby modes.

Indicator Lights 
The Mix Low light alerts the operator to add mix.

Electronic Controls 
Finished product quality is monitored by SoftechTM controls that measure viscosity.

During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.

Air Filter
Easily removable, cleanable air filter helps keep condenser clean for optimal refrigeration system performance.

Door Interlock System
Protects the operator from injury as the beater will not operate without the dispensing door in place.

Optional cart recommended for self service application to meet
Americans with Disabilites Act (ADA) dispensing height.

For more detailed information, you can download brochure
Download PDF

One dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Manufactured to be cord connected. Consult the international Taylor distributor for cord & receptacle specifications for 50 Hz. equipment.

Beater Motor 
Two, 0.5 HP

Refrigeration System
One, 4,900 BTU/hr compressor (nominal rating). R404A. 
Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. 
(Actual BTUs will vary based on application.)

Air Cooled
Minimum Clearance: 6” (152 mm) on left and right, and 0” in the rear.
Minimum air clearances must be met to assure adequate air flow for optimum performance.

Water Cooled
Water inlet and drain connections out of rear 3/8” FPT.

• Cart with casters - recommended for self service to meet ADA compliant dispensing height
Net Weight: 105 lbs. (47.6 kg 
Crated Weight: 130 lbs. (59.0 kg)
• Cone Dispenser
• Legs - [increase height of unit by 4-1/4” (108 mm)]


Continuing research results in steady improvements; therefore, 
these specifications are subject to change without notice.